RESTORATION OF HARD TISSUE DEFECTS OF CHEWING TEETH WITH PARTIAL AND FULL CERAMIC CAD/CAM RESTORATIONS. A LITERATURE REVIEW
DOI:
https://doi.org/10.35220/2078-8916-2024-52-2.18Keywords:
CAD/CAM, partial ceramic restorations, full ceramic crowns, lithium disilicate, zirconium dioxide.Abstract
Purpose of the study. The article provides a systematic review of the literature with an analysis of the survival of the structure, the character and frequency of complications in orthopedic treatment with partial and full ceramic CAD/ CAM restorations in the long term. The use of a digital protocol in the manufacture of orthopedic structures has many advantages: minimal invasive preparation, high precision, strength and aesthetics. The increase in the population's demand for aesthetic non-removable prosthetics has led to substantial progress in dental materials science, and design features of manufacturing, as well as an increase in the tendency to use monolithic restorations. Research methods. The authors analyzed literature data, using such portals as PubMed, Scopus, Journal of Esthetic and Restorative Dentistry and other bibliographic sources. Scientific novelty. According to the results of our research, the following clinical aspects should be noted: the minimally invasive character of the preparation for partial ceramic restorations is justified, the greater strength of these structures with a frame thickness of 0.5 – 1.0 mm, under the influence of loads, was proven in comparison with full crowns of the same thickness. Therefore, when restoring with full ceramic crowns, we cannot talk about minimally invasive preparation, precisely when the thickness of the frame of full crowns increases to 1.5 mm, cracks and chips are not observed. Conclusions. According to the results of research by many scientists, with sufficient preservation of healthy tissues and vitality of the restored tooth, preference should be given to glass-ceramic partial restorations. In the future, we will pay more attention to the influence of tooth vitality in restoring defects of hard dental tissues with partial ceramic restorations.
References
Арендарюк В.М. Клініко-експериментальне обґрунтування збереження вітальності зубів при застосуванні незнімних конструкцій зубних протезів: дис. ... канд. мед. наук : 14.01.22. Полтава, 2001. 146 с.
AlHelal A.A. Biomechanical behavior of allceramic endocrowns fabricated using CAD/CAM: Asystematic review. J Prosthodont Res. 2024. Vol. 68. № 1. P. 50–62.
Цветкова Н.В. Морфо-функціональні зміни в навколо зубних тканинах при препаруванні зубів під естетико-косметичні протези. Вісник проблем біології і медицини. 2001. Вип. 6. С. 89–92.
Sieper K., Wille S., Kern M. Fracture strength of lithium disilicate crowns compared to polymerinfiltrated ceramic-network and zirconia reinforced lithium silicate crowns. J Mech Behav Biomed Mater. 2017. Vol. 74. P. 342–348.
Schweiger J., Erdelt K.J., Graf T., Sciuk T., Edelhoff D., Güth J.F. The Fracture Load as a Function of the Material Thickness: The Key to Computing the Strength of Monolithic All-Ceramic Materials. Materials (Basel) : website. URL: https://ncbi.nlm.nih.gov/pmc/
articles/PMC10004144/.
Zhang Y., Mai Z., Barani A., Bush M., Lawn B. Fracture-resistant monolithic dental crowns. Dent Mater. 2016. Vol. 32. № 3. P. 442–449.
Gupta S., Abdulmajeed A., Donovan T., Boushell L., Bencharit S., Sulaiman T.A. Monolithic Zirconia Partial Coverage Restorations: An In Vitro Mastication Simulation Study. J Prosthodont. 2021. Vol. 30. № 1. P. 76–82.
Zhang Y., Lawn B.R. Novel Zirconia Materials in Dentistry. J Dent Res. 2018. Vol. 97 № 2. P. 140–147.
Zhang Y., Vardhaman S., Rodrigues C.S., Lawn B.R. A Critical Review of Dental Lithia-Based Glass-Ceramics. J Dent Res. 2023. Vol. 102. № 3. P. 245–253.
Kim J.W., Thompson V.P., Rekow E.D., Jung Y.G., Zhang Y. Fracture Modes in Curved Brittle Layers Subject to Concentrated Cyclic Loading in Liquid Environments. J Mater Res. 2009. Vol. 24. № 3. P. 1075–1081.
Zhang Y., Sailer I., Lawn B.R. Fatigue of dental ceramics. J Dent. 2013. Vol. 41. № 12. P. 1135–1147.
Prott L.S., Spitznagel F.A., Bonfante E.A., Malassa M.A., Gierthmuehlen P.C. Monolithic zirconia crowns: effect of thickness reduction on fatigue behavior and failure load. J Adv Prosthodont. 2021. Vol. 13. № 5. P. 269–280.
Loomans B., Opdam N., Attin T., et al. Severe Tooth Wear: European Consensus Statement on Management Guidelines. J Adhes Dent. 2017. Vol. 19. № 2. P. 111–119.
Fontijn-Tekamp F.A., Slagter A.P., Van Der Bilt A., et al. Biting and chewing in overdentures, full dentures, and natural dentitions. J Dent Res. 2000. Vol. 79. № 7. P. 1519–1524.
Alghauli M., Alqutaibi A.Y., Wille S., Kern M. Clinical outcomes and influence of material parameters on the behavior and survival rate of thin and ultrathin occlusal veneers: A systematic review. J Prosthodont Res. 2023. Vol. 67. № 1. P. 45–54.
Valenzuela E.B.S., Andrade J.P., da Cunha P.F.J.S., Bittencourt H.R., Spohr A.M. Fracture load of CAD/CAM ultrathin occlusal veneers luted to enamel or dentin. J Esthet Restor Dent. 2021. Vol. 33 № 3. P. 516–521.
Angerame D., De Biasi M., Agostinetto M., Franzò A., Marchesi G. Influence of preparation designs on marginal adaptation and failure load of full-coverage occlusal veneers after thermomechanical aging simulation. J Esthet Restor Dent. 2019. Vol. 31. № 3. P. 280–289.
Ioannidis A., Bomze D., Hämmerle C.H.F., Hüsler J., Birrer O., Mühlemann S. Load-bearing capacity of CAD/CAM 3D-printed zirconia, CAD/CAM milled zirconia, and heat-pressed lithium disilicate ultra-thin occlusal veneers on molars. Dent Mater. 2020. Vol. 36.
№ 4. P. 109–116.
Edelhoff D., Sorensen J.A. Tooth structure removal associated with various preparation designs for posterior teeth. Int J Periodontics Restorative Dent. 2002. Vol. 22. № 3. P. 241–249.
Kim JH., Cho J., Lee Y., Cho B.H. The Survival of Class V Composite Restorations and Analysis of Marginal Discoloration. Oper Dent. 2017. Vol. 42. № 3. P. 93–101.
Guess P.C., Schultheis S., Wolkewitz M., Zhang Y., Strub J.R. Influence of preparation design and ceramic thicknesses on fracture resistance and failure modes of premolar partial coverage restorations. J Prosthet Dent. 2013. Vol. 110. № 4. P. 264–273.
Murgueitio R., Bernal G. Three-year clinical follow-up of posterior teeth restored with leucitereinforced ips empress onlays and partial veneer crowns. J Prosthodont. 2012. Vol. 21. № 5. P. 340–345.
Wang B., Fan J., Wang L., Xu B., Wang L., Chai L. Onlays/partial crowns versus full crowns in restoring posterior teeth: a systematic review and meta-analysis. Head Face Med : website. URL: https://pubmed.ncbi.nlm.nih.gov/36411462/
Malament K.A., Socransky S.S. Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: effect of luting agent and tooth or tooth-substitute core structure. J Prosthet Dent. 2001. Vol. 86. № 5. P. 511–519.
Klink A., Huettig F. Complication and survival of Mark II restorations: 4-year clinical follow-up. Int J Prosthodont. 2013. Vol. 26. № 3. P. 272–276.
Abduo J., Sambrook R.J. Longevity of ceramic onlays: A systematic review. J Esthet Restor Dent. 2018. Vol. 30. № 3. P. 193–215.
Alberto Jurado C., Kaleinikova Z., Tsujimoto A., Alberto Cortés Treviño D., Seghi R.R., Lee D.J. Comparison of Fracture Resistance for Chairside CAD/CAM Lithium Disilicate Crowns and Overlays with Different Designs. J Prosthodont. 2022. Vol. 31. № 4. P. 341–347.
Gierthmuehlen P.C., Jerg A., Fischer J.B., Bonfante E.A., Spitznagel F.A. Posterior minimally invasive full-veneers: Effect of ceramic thicknesses, bonding substrate, and preparation designs on failure-load and-mode after fatigue. J Esthet Restor Dent. 2022. Vol. 34.
№ 1. P. 145–153.
Čalušić Šarac M., Jakovac M. The Influence of Social Network Content on the Perception of Smiles-A Randomized Controlled Trial. Dent J (Basel). 2022. Vol. 10. № 9. P. 168.
Cortellini D., Canale A. Bonding lithium disilicate ceramic to feather-edge tooth preparations: a minimally invasive treatment concept. J Adhes Dent. 2012. Vol. 14. № 1. P. 7–10.
Jurado C.A., Pinedo F., Trevino D.A.C., et al. CAD/CAM lithium disilicate ceramic crowns: Effect of occlusal thickness on fracture resistance and fractographic analysis. Dent Mater J. 2022. Vol. 41. № 5. P. 705–709.
Edelhoff D., Erdelt K.J., Stawarczyk B., Liebermann A. Pressable lithium disilicate ceramic versus CAD/CAM resin composite restorations in patients with moderate to severe tooth wear: Clinical observations up to 13 years. J Esthet Restor Dent. 2023. Vol. 35.
№ 1. P. 116–128.
Aslan Y.U., Uludamar A., Özkan Y. Clinical performance of pressable glass-ceramic veneers after 5, 10, 15, and 20 years: A retrospective case series study. J Esthet Restor Dent. 2019. Vol. 31. № 5. P. 415–422.
Malament K.A., Margvelashvili-Malament M., Natto Z.S., Thompson V., Rekow D., Att W. Comparison of 16.9-year survival of pressed acid etched e.max lithium disilicate glass-ceramic complete and partial coverage restorations in posterior teeth: Performance and outcomes as a function of tooth position, age, sex, and thickness of ceramic material. J Prosthet Dent. 2021. Vol. 126. № 4. P. 533–545.
Aziz A.M., El-Mowafy O., Tenenbaum H.C., Lawrence H.P. Clinical performance of CAD-CAM crowns provided by predoctoral students at the University of Toronto. J Prosthet Dent. 2022. Vol. 127. № 5. P. 729–736.
Rauch A., Lorenz L., Reich S., Hahnel S., Schmutzler A., Schierz O. Long-term survival of monolithic tooth-supported lithium disilicate crowns fabricated using a chairside approach: 15-year results. Clin Oral Investig. 2023. Vol. 27. № 7. P. 3983–3989.
Sorrentino R., Triulzio C., Tricarico M.G., Bonadeo G., Gherlone E.F., Ferrari M. In vitro analysis of the fracture resistance of CAD-CAM monolithic zirconia molar crowns with different occlusal thickness. J Mech Behav Biomed Mater. 2016. Vol. 61. P. 328–333.
Ivoclar Vivadent. IPS e.max CAD. Monolithic Solutions LABSIDE Instructions for Use. Accessed July, 18. 2023. P. 68.
Rekow E.D., Zhang G., Thompson V., Kim J.W., Coehlo P., Zhang Y. Effects of geometry on fracture initiation and propagation in all-ceramic crowns. J Biomed Mater Res B Appl Biomater. 2009. Vol. 88. № 2. P. 436–446.
Lucas P.W., van Casteren A. The wear and tear of teeth. Med Princ Pract. 2015. Vol. 24. Suppl 1 (Suppl 1).
Ma L., Guess P.C., Zhang Y. Load-bearing properties of minimal-invasive monolithic lithium disilicate and zirconia occlusal onlays: finite element and theoretical analyses. Dent Mater. 2013. Vol. 29. № 7. P. 742–751.
Chen S.E., Park A.C., Wang J., Knoernschild K.L., Campbell S., Yang B. Fracture Resistance of Various Thickness e.max CAD Lithium Disilicate Crowns Cemented on Different Supporting Substrates: An In Vitro Study. J Prosthodont. 2019. Vol. 28. № 9. P. 997–1004.
Vagropoulou G.I., Klifopoulou G.L., Vlahou S.G., Hirayama H., Michalakis K. Complications and survival rates of inlays and onlays vs complete coverage restorations: A systematic review and analysis of studies. J Oral Rehabil. 2018. Vol. 45. № 11. P. 903–920.
Schlichting L.H., Resende T.H., Reis K.R., Raybolt Dos Santos A., Correa I.C., Magne P. Ultrathin CADCAM glass-ceramic and composite resin occlusal veneers for the treatment of severe dental erosion: An up to 3-year randomized clinical trial. J Prosthet Dent. 2022. Vol. 128. № 2. P. 158.
Spitznagel F.A., Prott L.S., Hoppe J.S., et al. Minimally invasive CAD/CAM lithium disilicate partialcoverage restorations show superior in-vitro fatigue performance than single crowns. J Esthet Restor Dent. 2024. Vol. 36. № 1. P. 94–106.
Kongkiatkamon S., Rokaya D., Kengtanyakich S., Peampring C. Current classification of zirconia in dentistry: an updated review: website. URL: https://pubmed.ncbi.nlm.nih.gov/37465158/.
Al-Amleh B., Lyons K., Swain M. Clinical trials in zirconia: a systematic review. J Oral Rehabil. 2010. Vol. 37. № 8. P. 641–652.
Johansson C., Kmet G., Rivera J., Larsson C., Vult Von Steyern P. Fracture strength of monolithic all-ceramic crowns made of high translucent yttrium oxide-stabilized zirconium dioxide compared to porcelain-veneered crowns and lithium disilicate crowns. Acta Odontol Scand. 2014. Vol. 72. № 2. P. 145–153.
Lameira D.P., Buarque e Silva W.A., Andrade e Silva F., De Souza G.M. Fracture Strength of Aged Monolithic and Bilayer Zirconia-Based Crowns. Biomed Res Int: website. URL: https://pubmed.ncbi.nlm.nih.gov/26576423/.
Sun T., Zhou S., Lai R., et al. Load-bearing capacity and the recommended thickness of dental monolithic zirconia single crowns. J Mech Behav Biomed Mater. 2014. Vol. 35. P. 93–101.
Sailer I., Makarov N.A., Thoma D.S., Zwahlen M., Pjetursson B.E. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs) A systematic review of the survival and complication rates. Part I: Single crowns (SCs) [published correction appears
in Dent Mater. 2016. Vol. 32. № 12. P. 389–390. Dent Mater. 2015. Vol. 31. № 6. P. 603–623.
Miura S., Yamauchi S., Kasahara S., Katsuda Y., Fujisawa M., Egusa H. Clinical evaluation of monolithic zirconia crowns: a failure analysis of clinically obtained cases from a 3.5-year study. J Prosthodont Res. 2021. Vol. 65. № 2. P. 148–154.
Kontonasaki E., Rigos A.E., Ilia C., Istantsos T. Monolithic Zirconia: An Update to Current Knowledge. Optical Properties, Wear, and Clinical Performance. Dent J (Basel). 2019. Vol. 7. № 3. P. 90.
Miyazaki T., Nakamura T., Matsumura H., Ban S., Kobayashi T. Current status of zirconia restoration. J Prosthodont Res. 2013. Vol. 57. № 4. P. 236–261.
Guess P.C., Zavanelli R.A., Silva N.R., Bonfante E.A., Coelho P.G., Thompson V.P. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont. 2010. Vol. 23. № 5. P. 434–442.
Swain M.V., Mercurio V., Tibballs J.E., Tholey M. Thermal induced deflection of a porcelain-zirconia bilayer: Influence of cooling rate. Dent Mater. 2019. Vol. 35. № 4. P. 574–584.
Vigolo P., Mutinelli S. Evaluation of zirconiumoxide-based ceramic single-unit posterior fixed dental prostheses (FDPs) generated with two CAD/CAM systems compared to porcelain-fused-to-metal single-unit posterior FDPs: a 5-year clinical prospective study. J Prosthodont. 2012. Vol. 21. № 4. P. 265–269.
Beuer F., Stimmelmayr M., Gueth J.F., Edelhoff D., Naumann M. In vitro performance of full-contour zirconia single crowns. Dent Mater. 2012. Vol. 28. № 4. P. 449–456.
Nakamura K., Harada A., Kanno T., et al. The influence of low-temperature degradation and cyclic loading on the fracture resistance of monolithic zirconia molar crowns. J Mech Behav Biomed Mater. 2015. Vol. 47. P. 49–56.
Bömicke W., Rammelsberg P., Stober T., Schmitter M. Short-Term Prospective Clinical Evaluation of Monolithic and Partially Veneered Zirconia Single Crowns. J Esthet Restor Dent. 2017. Vol. 29. № 1. P. 22–30.
Gunge H., Ogino Y., Kihara M., Tsukiyama Y., Koyano K. Retrospective clinical evaluation of posterior monolithic zirconia restorations after 1 to 3.5 years of clinical service. J Oral Sci. 2018. Vol. 60. № 1. P. 154–158.
Solá-Ruiz M.F., Baixauli-López M., Roig-Vanaclocha A., Amengual-Lorenzo J., Agustín-Panadero R. Prospective study of monolithic zirconia crowns: clinical behavior and survival rate at a 5-year follow-up. J Prosthodont Res. 2021. Vol. 65. № 3. P. 284–290.
Tekin Y.H., Hayran Y. Fracture resistance and marginal fit of the zirconia crowns with varied occlusal thickness. J Adv Prosthodont. 2020. Vol. 12. № 5. P.283–290.
Weigl P., Sander A., Wu Y., Felber R., Lauer H.C., Rosentritt M. In-vitro performance and fracture strength of thin monolithic zirconia crowns. J Adv Prosthodont. 2018. Vol. 10. № 2. P. 79–84.
Sorrentino R., Triulzio C., Tricarico M.G., Bonadeo G., Gherlone E.F., Ferrari M. In vitro analysis of the fracture resistance of CAD-CAM monolithic zirconia molar crowns with different occlusal thickness. J Mech Behav Biomed Mater. 2016. Vol. 61. P. 328–333.
Nordahl N., Vult von Steyern P., Larsson C. Fracture strength of ceramic monolithic crown systems of different thickness. J Oral Sci. 2015. Vol. 57. № 3. P. 255–261.
Gierthmuehlen P., Rübel A., Stampf S., Spitznagel F. Effect of Reduced Material Thickness on Fatigue Behavior and Failure Load of Monolithic CAD/CAM PICN Molar Crowns. Int J Prosthodont. 2019. Vol. 32. № 1. P. 71–74.
CEREC MTL Zirconia | Dentsply Sirona Global : website. URL: https://www.dentsplysirona.com/en/discover/discover-by-brand/cerec-mtl-zirconia.html.
Ferrario V.F., Sforza C., Zanotti G., Tartaglia G.M. Maximal bite forces in healthy young adults as predicted by surface electromyography. J Dent. 2004. Vol. 32. № 6. P. 451–457.
